SiliCreate TC20 Condensation Silicone Rubber
Our TC20 is a high performing, economical, tin/condensation cure silicone rubber. It can be used for a variety of applications, including creating moulds, casting, and more.
Our tin cure silicones are less prone to cure inhibition and less temperature sensitive when compared to our platinum cure silicones.
The included syringe makes measuring out catalyst easy!
Catalyst is included!
- 100:3 mixing ratio
- Economical moulding silicone
- Resistant to cure inhibition from resins etc.
Mixing
Mixing Ratio: 100:3 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 9-10 hours
Specifications
Tin/Condensation Cure Silicone Rubber
Colour – White
High tear strength
Temperature Resistant (-30 to 120 degrees C)
Shrinkage Rate - 0.3%
Shore Hardness – 20A
Our TC20 is a high performing, economical, tin/condensation cure silicone rubber. It can be used for a variety of applications, including creating moulds, casting, and more.
Our tin cure silicones are less prone to cure inhibition and less temperature sensitive when compared to our platinum cure silicones.
The included syringe makes measuring out catalyst easy!
Catalyst is included!
- 100:3 mixing ratio
- Economical moulding silicone
- Resistant to cure inhibition from resins etc.
Mixing
Mixing Ratio: 100:3 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 9-10 hours
Specifications
Tin/Condensation Cure Silicone Rubber
Colour – White
High tear strength
Temperature Resistant (-30 to 120 degrees C)
Shrinkage Rate - 0.3%
Shore Hardness – 20A
Our TC20 is a high performing, economical, tin/condensation cure silicone rubber. It can be used for a variety of applications, including creating moulds, casting, and more.
Our tin cure silicones are less prone to cure inhibition and less temperature sensitive when compared to our platinum cure silicones.
The included syringe makes measuring out catalyst easy!
Catalyst is included!
- 100:3 mixing ratio
- Economical moulding silicone
- Resistant to cure inhibition from resins etc.
Mixing
Mixing Ratio: 100:3 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 9-10 hours
Specifications
Tin/Condensation Cure Silicone Rubber
Colour – White
High tear strength
Temperature Resistant (-30 to 120 degrees C)
Shrinkage Rate - 0.3%
Shore Hardness – 20A