SiliCreate Soft-0A Silicone Rubber
Our Soft-0 Silicone Rubber is perfect for most moulding and casting needs.
- Very easy to use with 1:1 mixing ratio.
- Reproduce very fine details with ease.
- Very low viscosity for simple mixing and vacuum degassing is not necessary.
Mixing
Mixing Ratio: 1:1 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 6-7 hours (depends on temperature, warmer = quicker)
Specifications
Platinum Cured Silicone
Colour – Translucent
High tear strength
Temperature Resistant (-60 – 200 degrees Celsius)
Skin Safe/Food grade (odourless and non-toxic)
Nil Shrinkage Rate (0.1%)
Cured Density – 1.1 g/cm3
Low Shore Hardness – 0A
Our Soft-0 Silicone Rubber is perfect for most moulding and casting needs.
- Very easy to use with 1:1 mixing ratio.
- Reproduce very fine details with ease.
- Very low viscosity for simple mixing and vacuum degassing is not necessary.
Mixing
Mixing Ratio: 1:1 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 6-7 hours (depends on temperature, warmer = quicker)
Specifications
Platinum Cured Silicone
Colour – Translucent
High tear strength
Temperature Resistant (-60 – 200 degrees Celsius)
Skin Safe/Food grade (odourless and non-toxic)
Nil Shrinkage Rate (0.1%)
Cured Density – 1.1 g/cm3
Low Shore Hardness – 0A
Our Soft-0 Silicone Rubber is perfect for most moulding and casting needs.
- Very easy to use with 1:1 mixing ratio.
- Reproduce very fine details with ease.
- Very low viscosity for simple mixing and vacuum degassing is not necessary.
Mixing
Mixing Ratio: 1:1 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 6-7 hours (depends on temperature, warmer = quicker)
Specifications
Platinum Cured Silicone
Colour – Translucent
High tear strength
Temperature Resistant (-60 – 200 degrees Celsius)
Skin Safe/Food grade (odourless and non-toxic)
Nil Shrinkage Rate (0.1%)
Cured Density – 1.1 g/cm3
Low Shore Hardness – 0A
