SiliCreate Soft Silicone Rubber
Our Soft Silicone Rubber is perfect for most moulding and casting needs, it’s soft texture and strength is perfect for moulding applications, while it’s clean colour and skin safe rating means it works great to cast silicone objects.
- Very easy to use with 1:1 mixing ratio.
- Reproduce very fine details with ease.
- Very low viscosity for simple mixing and vacuum degassing is not necessary.
Mixing
Mixing Ratio: 1:1 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 6-8 hours (depends on temperature, warmer = quicker)
Specifications
Platinum Addition Cure Silicone
Colour – Milky White
High tear strength
Temperature Resistant (-60 to 200 degrees C)
Skin Safe/Food grade (odourless and non-toxic)
Nil Shrinkage Rate (0.1%)
Cured Density – 1.1 g/cm3
Shore Hardness – 15A
Our Soft Silicone Rubber is perfect for most moulding and casting needs, it’s soft texture and strength is perfect for moulding applications, while it’s clean colour and skin safe rating means it works great to cast silicone objects.
- Very easy to use with 1:1 mixing ratio.
- Reproduce very fine details with ease.
- Very low viscosity for simple mixing and vacuum degassing is not necessary.
Mixing
Mixing Ratio: 1:1 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 6-8 hours (depends on temperature, warmer = quicker)
Specifications
Platinum Addition Cure Silicone
Colour – Milky White
High tear strength
Temperature Resistant (-60 to 200 degrees C)
Skin Safe/Food grade (odourless and non-toxic)
Nil Shrinkage Rate (0.1%)
Cured Density – 1.1 g/cm3
Shore Hardness – 15A
Our Soft Silicone Rubber is perfect for most moulding and casting needs, it’s soft texture and strength is perfect for moulding applications, while it’s clean colour and skin safe rating means it works great to cast silicone objects.
- Very easy to use with 1:1 mixing ratio.
- Reproduce very fine details with ease.
- Very low viscosity for simple mixing and vacuum degassing is not necessary.
Mixing
Mixing Ratio: 1:1 by weight
Cures at room temperature (23 degrees C)
Working/Mixing time of 30-40mins
Sets/cures in 6-8 hours (depends on temperature, warmer = quicker)
Specifications
Platinum Addition Cure Silicone
Colour – Milky White
High tear strength
Temperature Resistant (-60 to 200 degrees C)
Skin Safe/Food grade (odourless and non-toxic)
Nil Shrinkage Rate (0.1%)
Cured Density – 1.1 g/cm3
Shore Hardness – 15A
